Post subject: Water loss in the cooling system and 2x not re

Návody, rady, skúsenosti...

Moderátori: Hammer, Moderátor

Napísať odpoveď
notly1988
Autoškolák
Autoškolák
Príspevky: 1
Dátum registrácie: 15.08.2018 04:05

Post subject: Water loss in the cooling system and 2x not re

Príspevok od používateľa notly1988 »

I was beginning to see the water in the cooling system, the Golf4 1.6 74kw type. AKL 180,000 km
1. When the ripe began, a repassement was made and the head gasket was pressed all O.K, driven about 5,000km and again, when dismantled all the cabins on the head, kt. did not help
the head was crooked
2. followed by the second repas head for pressures, aligned and the whole GO, the seat of the valve was just a new gasket, a new gasket, the engine block was flat and it was cool and after 1,200km again, the hoses were pressurized, the water, the white smoke ...

I ask for advice and I do not know what else to do all new and yet

it occurred to me that I did not crack the coolant oil and so it gets messed up, someone had a problem too ??????????

thank you for all the answers

Napísať odpoveď

Návrat na "VAG & ETKA & ChipTuning"